Executive
Portable Loop System |
| |
|
| The
Executive system has an internal metal shield that encapsulates and
protects the induction loop amplifier and radio microphone receiver
module. The loop drum and microphone(s) can all be stored in the case.
When setting up the system just unwind the loop cable from the drum
and place it to the perimeter of the room. Easy to follow, clearly
marked screen printed instuctions on the metal sheilding help you
connect the microphone cable and the loop drum to the appropriate
socket. The system is then connecedt to a 13amp mains socket and it
is up and running in no time. A test meter is supplied to set up and
test the system is working. |
70A
Executive Portable System (70EP1)
1 Univox 70A Loop amplifier (up to 70 metres2)
1 Boundary microphone
1 Hand held dynamic microphone
1 Loop listening/test meter
1 Loop drum 35 metres (covers 60 metres2) |
|
| |
70A
Executive Portable System
(70EP2)
1 Univox 70A Loop
amplifier (up to 70 metres2)
1 Tie clip radio microphone
1 Hand held dynamic microphone
1 Loop listening/test meter
1 Loop drum 35 metres (covers
60 metres2) |
|
| |
|
70A
Executive Portable System
(70EP3)
1 Univox 70A Loop
amplifier (up to 70 metres2)
1 Tie clip radio microphone
1 Boundary microphone
1 Loop listening/test meter
1 Loop drum 35 metres
(covers 60 metres2) |
|
| |
|
|
70A
Executive Portable System
(70EP4)
1 Univox 70A
Loop amplifier (up to 70 metres2)
1 Tie clip radio microphone
1 Boundary microphone
1 Hand held dynamic microphone
1 Loop listening/test meter
1 Loop drum 35 metres (covers
60 metres2)
|
|
| PALS
170 Portable Audio Loop Systems up to 170 square metres |
|
|
|
The
PALS170 Portable Audio Loop System can have up to four radio microphones
or options to have two hard wired microphones. You can have a mixture
of different microphones to suit dufferent situations. Using a hand
held, tie clip or boundary radio microphone the hazards of tripping
over a cable is eliminated. The PALS 170 system has an internal
metal shield that encapsulates and protects the loop amplifier and
radio microphone receiver module. The loop drum and microphone(s)
can all be stored in the case. When setting up the system just unwind
the loop cable from the drum and place it to the perimeter of the
room. Easy to follow, clearly marked screen printed instuctions
on the metal sheilding help you connect the microphone cable and
the loop drum to the appropriate socket. The system is then connecedt
to a 13amp mains socket and it is up and running in no time. A test
meter is supplied to set up and test the system is working.
Extra
information please read
|
| |
PALS
Portable Audio Loop System (170EP1)
1 Boundary microphone (wired)
1 Hand held dynamic microphone (wired)
1 Loop listening/test meter
1 Loop drum 50 metres of cable (covers
100m2) |
|
| |
PALS
Portable Audio Loop System (170EP2)
1 Tie clip radio
microphone
1 Hand held dynamic microphone (wired)
1 Loop listening/test meter
1 Loop drum 50 metres of cable (covers 100m2) |
|
| |
|
PALS
Portable Audio Loop System (170EP3)
1 Tie clip radio
microphone
1 Boundary microphone (wired)
1 Loop listening/test meter
1 Loop drum 50 metres of cable (covers
100m2) |
|
| |
|
PALS
Portable Audio Loop System (170EP4)
1 Tie clip radio
microphone
1 Boundary microphone
1 Hand held dynamic microphone
1 Loop listening/test meter
1 Loop drum 50 metres of cable (covers
100m2) |
|
| |