The Reception desk loop system has been specifically designed for ease of communication between a receptionist and a client. The system can be installed at most reception desks. At a large reception desk where several points of contact are possible a loop system may be required for each point of contact. Installation of several loop systems at one desk will require consultation with us. A 13amp mains socket will be required for each system.

A DIY Reception desk induction loop kit is easy to install and set up. A person who is competent at DIY will be able to follow our easy user instruction leaflet. We also provide guidance by telephone should you need further instruction.

The Loop listening / test unit can be provided as part of the kit to help you adjust, set up, test and listen to the level of the loop system. Only one meter per building(s) is required. It has twin LED's to indicate the level of the loop system is set correctly. The meter has an in-built loudspeaker to listen and test the quality of sound via the loop system.

Please see below a list of DIY induction loop kits, which can be purchased for self-installation. Please telephone us to discuss exact requirements with details of the measurements and layout of the room. We always ascertain that we are selling the correct equipment for your needs before we despatch your order. Payment is required with order. Prices are given verbally at the time of enquiry and followed by a written estimate.

Field strength meter hire service
It is important that any site allocated for an inductive loop system is checked for background interference (in accordance with BS6083 Part 4). This test must be carried out before the equipment is ordered. A Field Strength Meter can be hired from us to carry out this test. Full instructions on how to test for interference are supplied with the meter and a help line is also on hand.